St. George, UT Pool Resurfacing Cost Guide

Pool Resurfacing Cost in St. George, UT

As of September 2026, pool resurfacing typically costs $6,000–$15,000 for an average 1,000 sq. ft. pool (national average about $11,000) — plaster runs about $4/sq ft, pebble/aggregate about $10/sq ft, and tile $25+/sq ft.

St. George Elite Pools · St. George, UT · phone line live at launch · Updated September 22, 2026

A pool's interior surface doesn't last forever — plaster typically needs resurfacing after about a decade, sooner in a climate with St. George's level of year-round sun and chemical demand. This guide covers what resurfacing costs by material, since material choice drives the price far more than anything else.

Resurfacing cost by material

A full resurface of an average 1,000 sq. ft. pool typically runs $6,000–$15,000, averaging around $11,000. Material is the single biggest driver of where in that range — or above it — a project lands.

Cost per square foot by material
Item	Typical range	Source
Paint Lasts about 2–5 years.	$1–$1/sq ft	Angi 2026 (national, material + install, per sq. ft.)
Plaster Lasts about 10 years — the standard mid-cost option.	$4–$4/sq ft	Angi 2026 (national, material + install, per sq. ft.)
Pebble / large aggregate Lasts 20+ years.	$10–$10/sq ft	Angi 2026 (national, material + install, per sq. ft.)
Tile Longest-lasting option.	$25–$35/sq ft	Angi 2026 (national, material + install, per sq. ft.)

Resurfacing cost by pool type

By pool construction type
Item	Typical range	Source
Concrete / gunite (per 1,000 sq ft)	$6,500–$6,500	Angi 2026 (national)
Fiberglass, full resurface (per 1,000 sq ft)	$6,500–$6,500	Angi 2026 (national)
Fiberglass, gel coat + paint	$1,000–$1,200	Angi 2026 (national, fiberglass gel coat + paint)
Vinyl liner replacement (per 1,000 sq ft)	$1,000–$3,500	Angi 2026 (national, vinyl liner replacement)

Labor & prep costs

Labor and prep
Item	Typical range	Source
Refinishing labor	$45–$65/hr	Angi 2026 (national, refinishing labor)
Drain, clean & prep	$425–$475	Angi 2026 (national, prep work)

Refill water is billed separately by your utility, not the pool company — budget for it separately from the resurfacing quote itself.

Why material choice matters more in St. George

St. George gets significantly more annual sun exposure than most U.S. markets, and the area's hard water (roughly 342 ppm) accelerates the calcium scaling that shortens a plaster surface's usable life. That doesn't make plaster the wrong choice — it's still the most common, lowest-cost option — but it's a real reason some St. George owners choose pebble/aggregate finishes despite the higher upfront cost, trading a bigger initial spend for roughly double the lifespan before the next resurfacing project.

Questions to ask a resurfacing company

Does the quote include draining, cleaning, and prep, or is that billed separately?
What's the warranty on the new surface, and does it cover staining or crazing specifically?
How do they handle the existing surface — full removal, or resurfacing over it?
What's the expected cure time before the pool can be refilled and used?

What this page is not. St. George Elite Pools is an independent referral service. We don't perform resurfacing or set any of these prices — we connect you with independent, local companies who quote their own work. This guide also covers cleaning and repair only per our scope — new pool construction is outside what we refer.

Get a real quote

Tell us about your pool and which material you're considering, and we'll connect you with an independent local company for a real quote. See also the full pool service cost guide for cleaning and repair pricing.

Common Questions

How much does it cost to resurface a pool in St. George?

Typically $6,000–$15,000 for an average 1,000 sq. ft. pool, averaging around $11,000, as of September 2026. The exact cost depends heavily on which material you choose and your pool's size.

What is the cheapest pool resurfacing material?

Paint is the cheapest at about $1/sq ft but lasts only 2–5 years. Plaster is the standard mid-cost option at about $4/sq ft and lasts roughly 10 years — it's usually the better long-term value over paint.

Is pebble or plaster better for a St. George pool?

Pebble/aggregate finishes cost more upfront (about $10/sq ft vs. plaster's $4/sq ft) but last 20+ years versus plaster's roughly 10 — in a climate with intense year-round sun exposure like St. George, the added UV and chemical resistance of pebble finishes is worth asking about, though plaster remains the lower-cost, well-proven option.

How long does pool resurfacing take?

We haven't verified a St. George-specific project timeline, so we don't state one here — ask a prospective company directly, since drain-and-cure time varies by material and weather.

Does resurfacing cost include draining and refilling the pool?

Not always — ask. Draining, cleaning, and prepping the pool typically adds $425–$475 nationally, separate from the resurfacing material and labor itself. Refill water is billed by your utility, not the pool company.

Get Matched With a Local Pool Pro

Tell us what's going on and your city — we'll connect you with an independent pool cleaning or repair company that covers it.

Form opens at launch — this preview shows the fields and consent language as built.